tyc太阳集团城网址_太阳城tyc网址入口

tyc太阳集团城网址

SFPH钻井液用硅氟抗高温高压降滤失剂

SFPH钻井液用硅氟抗高温高压降滤失剂

产品详情

SFPH钻井液用硅氟抗高温高压降滤失剂为黑色粉末,该产品是由苯酚、甲醛、硝基腐植酸和硅氟聚合物等在一定条件下接枝共聚而成,由于SFPH降滤失剂分子上引入抗高温、抗盐基团,显著增加了其抗温、抗盐性能,抗温可达200℃,适用于高温深井泥浆体系,能显著地降低淡水、饱和盐水钻井液的失水量,且明显改善泥饼质量和钻井液的流变性。

一、产品特性

1、抗温能力强,具有很好的降失水性能和广泛的抗污染能力。

2、粘度效应低,钻井液具有好的流变性。

3、可与各种钻井液体系配合使用,配伍性好。建议加量13 %。


二、性能指标

 

项    目

指  标

外观

       黑色流动粉末或颗粒

pH

811

烘失量,%

≤15

室温中压滤失量 mL

淡水浆

≤10

氯化钠污染浆

≤15

高温高压滤失量 mL

淡水浆

≤30

氯化钠污染浆

≤35


三、包装、运输及储存

包装袋为纸塑三合一包装袋,顶口缝合后用胶带粘结,每袋净重25±0.5kg

本品不燃、不爆、没毒、无害,按非危险品运输管理。

产品在储存过程中应注意防潮、防漏。有效期两年。

   本品避免与眼睛接触,否则用大量清水清洗。




SFPH High Temperature and High Pressure Fluid Loss Reducer with Silicon Fluoride for Drilling Fluid

Product Details

SFPH filtrate reducer for drilling fluid is black powder. The product is made of phenol, formaldehyde, NITROHUMIC acid and silicofluoropolymer by graft copolymerization under certain conditions. Due to the introduction of high temperature resistant and salt resistant groups into SFPH filtrate reducer, its temperature resistance and salt resistance are significantly increased. The temperature resistance can reach 200 ℃, which is suitable for high temperature and deep well mud system, It can significantly reduce the water loss of fresh water and saturated brine drilling fluid, and significantly improve the quality of mud cake and rheological properties of drilling fluid.

Product Features

1. Strong temperature resistance, good water loss reduction performance and extensive anti pollution ability.

2. The viscosity effect is low and the drilling fluid has good rheology.

3. It can be used with various drilling fluid systems with good compatibility. The recommended dosage is 1-3%.

Performance Index

project

index

Appearance

Black flowing powder or particle

pH

811

Drying loss%

≤15

Filtration at room

temperature and

medium pressure (ml)

Fresh water pulp

≤10

NaCl pollution pulp

≤15

Filtration at high

temperature and

high pressure (ml)

Fresh water pulp

≤30

NaCl pollution pulp

≤35


Packaging, Transportation and Storage

The packaging bag is a paper plastic three in one packaging bag. The top opening is sewn and bonded with adhesive tape. The net weight of each bag is 25 (± 0.5) kg.

This product is non combustible, non explosive, non-toxic and harmless, and is managed as non dangerous goods transportation.

The products should be protected from moisture and leakage during storage. It is valid for two years.

Avoid contact with eyes, or wash with plenty of water.